D-NEXUS Online Shop (Australia | New Zealand | Singapore) Eaton EX 2200 230V RT2U UPS

Eaton EX 2200 230V RT2U UPS - 68401	SGD $2,099.00
68401

Click to enlarge

Eaton EX 2200 230V RT2U UPS - 68401
Model: 68401

Double conversion (on-line)

Maximum availability

Topology: double conversion on-line UPS with automatic by-pass and power factor correction
Powershare: the Eaton EX output sockets are individually controlled to provide load-shedding to maximise the backup time and provide remote reboot and sequential start-up as standard
Continuous power supply: Hot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the UPS to be replaced without interrupting the power supply
Long backup times: 1 to 4 EXB battery units can be added to the Eaton EX. The Eaton EX 3000XL has a built-in super charger for extra long backup times

Minimum total cost of ownership

Easy operation: the LCD gives you access to a wide range of measurements and set-up menus
Remote supervision: the Eaton software suite offers a wide range of communication option including: SNMP and HTML, ModBus/JBus and relay outputs

Total flexibility
Eaton EX has unmatched Flexibility.

Format: EX 700 to 1500 are available in tower format or RT2U convertible rack/tower format (compatible with short-depth rack). EX 2200 & 3000 are available in RT2U format (optimised for rack mounting) or RT3U (for tower or short-depth racks)
Connections: with FlexPDU and HotSwap MBP, the RT2U and RT3U models can be connected by sockets or terminal blocks. They can be installed as required, on the side or on top of the unit
Compatible with high power factor loads: Eaton EX is rated for 0.9 power factor (700 VA/630 W, 1000 VA/900 W, 1500 VA/1350 W, 2200 VA/1980 W and 3000 VA/2700 W)
Communication: the EX includes both serial and USB ports, plus remote On/Off connector and an extra slot for optional communication cards. The UPS comes with a complete Eaton software suite.

Technical Specifications	2200
Rating (VA/W)	2200 VA / 1980 W
Format	RT2U (tower / rack 2U) and RT3U (tower / rack 3U)
Electrical characteristics
Architecture	On-line double conversion with automatic by-pass and power factor correction
Input voltage and frequency ranges without using batteries	100/120/160/184 V(2) to 284V - 40 to 70 Hz
Output voltage and frequency	230 V (adjustable to 200/208/220/240 V), 50/60 Hz auto-select or frequency converter mode
Connections
Input	IEC C20 (16A) or terminal block on HotSwap MBP HW (Hard-Wired)
Outputs	8 IEC C13 (10A) sockets + 1 IEC C19 (16A) socket
Remotely controlled Powershare sockets	2 groups of 2 x IEC C13 (10A) on Eaton EX
Additional outputs with HotSwap MBP FR/DIN/BS/IEC/HW	4 FR/Schuko sockets or 3 BS sockets or 6 IEC 10A sockets or terminal blocks (HW version)
Additional outputs with FlexPDU FR/DIN/BS/IEC	8 FR/Schuko sockets or 6 BS sockets or 12 IEC 10A sockets
Battery
Typical backup times for 50 and 70% load (6) except for Eaton EX 3000 XL⁵
EX	17 min / 12 min
EX + 1 EXB	85 min / 60 min
EX + 4 EXB	285 min / 200 min
Battery management	Automatic weekly test (period adjustable using LCD display or in software supplied), automatic recognition of external battery units => continuous maximisation of backup time + deep discharge protection
Interfaces
Indicators and display	3 LEDS + adjustable multilingual display: display of measurements, access to control and set-up menus
Communication ports	1 USB port + 1 RS232 serial port and relay contacts⁴ + 1 mini terminal block for remote ON/OFF and emergency stop
Communications card slots	1 slot for NMC Minislot card (included in Netpack version) or NMC ModBus/JBus or MC Contacts/Serial
Operating conditions, standards and approvals
Operating temperature noise level	0°C to 40°C continuous, 45 dBA
Performance - Safety - EMC	IEC/EN 62 040-3 (VFI-SS-113), IEC/EN 62 040-1-1, IEC/EN 60 950-1 (RD), IEC/EN 62 040-2 C1 Class
Approvals	CE, TüV, CB Report, UL
Dimensions W x H x D / Weight
EX	131 x 440 x 490 mm (compatible with 600 mm deep rack) / 30 kg (3000 XL = 18 kg)
EX RT2U	86 x 440 x 640 mm / 31 kg
EX EXB	131 x 440 x 490 mm (compatible with 600 mm deep rack) / 42 kg
EX EXB RT2U	/

Warranty: 2 Years Local On-Site warranty (parts and labour according to EATON's warranty terms and conditions)
Battery Warranty: 1 Year On-site

For more information, please visit this products webpage.

Singapore based customers please note : Prices shown is not inclusive of GST.
7% GST will be automatically added at the time of check out.

D-NEXUS is a TrustSg accredited business.
All Goods Sold By D-Nexus are Brand New and comes with Manufacturer Seal and Full Warranty.

APC UPS Selector Module

1. Use the UPS Selector module below to help you pick the UPS you need.
2. Key in the UPS Model number into Advanced Search to view/purchase the recommended UPS.

This product was added to our catalog on Thursday 08 October, 2009.